Nitrile Rubber Sheet - Plain
Nitrile rubber or acrylonitrile butadiene rubber is a co-polymer of butadiene and acrylonitrile. It has good general resistance to oil along with good mechanical properties, especially tensile strength, flexing, compression set and impermeability to gases.
​
NITRILE RUBBER-SHEET is an NBR/PVC based closed cell, flexible elastomeric foam insulation. It is environmentally-friendly as it is free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPAregistered antimicrobial agent is incorporated into the product providing additional protection against mold, fungal and bacterial growth. It is UL GREENGUARD Gold Certified for low VOC emissions.






TECHNICAL SPECIFICATIONS :
​
FLAME SPREAD / SMOKE DEVELOPMENT : <25/50 (ASTM E84)
HOT SURFACE PERFORMANCE : No Cracking or Delamination (ASTM C411)
OPERATING TEMPERATURE RANGE : -40°F (-40°C) to +200°F (93°C) (ASTM C534)
*For applications below -40°F (-40°C), contact K-FLEX technical support.
THERMAL CONDUCTIVITY 75°F (24°C) MEAN TEMP : 0.245 (0.0353)(ASTM C177)
UV / WEATHER RESISTANCE : Outdoor applications should be protected with an approved K-FLEX coating or cladding for optimum performance.
WATER VAPOR PERMEABILITY (DRY CUP: ELASTOMERIC INSULATION) : <0.01 perm-in
DENSITY : 3-6 lb/ft3
.png)
